Replaceable Magnesium Sacrificial Anode In Geyser G97 Magnesium Metal Rod AZ63

Replaceable Magnesium Sacrificial Anode In Geyser G97 Magnesium Metal Rod AZ63

Introduction:

In the inner tank of the water heater, the inner tank (the main component is iron) is in contact with water at the same time, and a primary battery is formed due to chemical principles. Since the water in the inner tank is not pure water, it always contains various impurities and is corrosive to a certain extent. When the water temperature exceeds 40 degrees, a scale will occur. If there is no anode magnesium rod, the liner will be corroded.​

Specification:

Features:

• The potential is relatively negative, the polarizability is low, the density is small, the theoretical capacitance is large, the effective potential difference with iron is large, and the protection radius is large.
• Through secondary refining, high purity, less impurities and dense structure
• Small grains, high current efficiency and good electrical properties
• The content of flux slag is low
• The surface is smooth, clean, free of pores, shrinkage cavities and slag inclusions
• Products of different specifications can be designed and produced according to user requirements to meet customer needs

Notice:

Once the magnesium rod is consumed, if it is not replaced in time, it is easy to cause corrosion of the inner tank or corrosion and perforation of the heating tube, which will cause the danger of electric leakage and cause personal injury. Therefore, the storage-type electric water heater needs to regularly clean the inner tank and replace the magnesium rod.

Generally speaking, the magnesium rods of electric water heaters need to be replaced every 2-3 years, and the magnesium rods of some low-quality electric water heaters will be used up in less than half a year.

Photos: